 |
|
Cable Controls
| PUSH-PULL CABLE CONTROLS |
| Part Number Ordering Code | EXAMPLE |
| Construction | 173 |
| 173 - Utility with Stainless end rods. | |
| 174 - Marine utility with stainless end rods, support tubes and inner member with stainless armor. | |
| 183 - Low Friction with telfon and nylon wear surfaces and stainless steel end rods. | |
| 184 - Marine Low Friction with telfon and nylon wear surfaces, stainless steel end rods, stainless steel swivel support tubes. | |
| Duty | M |
| Available in: V (Very light Duty), L (Light Duty), M (Medium Duty), H (Heavy Duty). | |
| Determine required duty by end rod diameter | |
| Conduit Caps | TG |
| TT (Threaded both ends), GG (Grooved both ends), RR (Rigid both ends), TG (Threaded one end, Grooved other end). | |
| Threads "W" on Conduit Caps: S=SAE Unified, M=Metric | S |
| Threads "F" on End Rods: S=SAE Unified, M=Metric | M |
| Travel M in Millimeters | 75 |
| Length Overall in Meters | 5 |
| Final Part Number= | 173-M-TG-S-M-75-5 |
| ALL METRIC DIMENSIONS ARE SHOWN IN MM | ALL SAE UNIFIED DIMENSIONS ARE SHOWN IN INCHES | MM - SHOWN IN RED |
| All Cables | Threaded Conduit Caps | Grooved Conduit Caps | Rigid Ends | |||||||||||||||||||
| Duty | Thread F |
Minimum Bend Radius |
Thread W |
Dimension "A" For Travel Shown |
Dimension "A" For Travel Shown |
Groove Dimension |
Thread W |
Mid Travel Dimension "A" For Travel Shown |
Dimension "C" Thread Length For Travel Shown |
|||||||||||||
| 50 2 |
75 3 |
100 4 |
125 5 |
50 2 |
75 3 |
100 4 |
125 5 |
Rad. Width |
Root Dia. |
50 2 |
75 3 |
100 4 |
125 5 |
50 2 |
75 3 |
100 4 |
125 5 |
|||||
| VLD | M5 x 0.8 10-32 UNF |
51 2 |
M12 7/16-20 UNF |
150 5.87 |
187 7.38 |
225 8.87 |
264 10.38 |
132 5.19 |
170 6.69 |
208 8.19 |
246 9.69 |
3.3 .13 |
6.4 .25 |
M8 5/16-24 UNF |
51 2.00 |
64 2.50 |
76 3.00 |
89 3.50 |
63 2.50 |
89 3.50 |
114 4.50 |
140 5.50 |
| LD | M6 x1.0 1/4-28 UNF |
76 3 |
M16 5/8-18 UNF |
155 6.12 |
194 7.62 |
232 9.12 |
270 10.62 |
140 5.50 |
178 7.00 |
216 8.50 |
254 10.00 |
4.3 .17 |
10.4 .41 |
M10 3/8-24 UNF |
54 2.12 |
67 2.62 |
79 3.12 |
92 3.62 |
63 2.50 |
89 3.50 |
114 4.50 |
140 5.50 |
| MD | M8x1.25 5/16-24 UNF |
127 5 |
M18 11/16-16 UNF |
167 6.56 |
205 8.06 |
243 9.56 |
281 11.06 |
149 5.87 |
187 7.38 |
225 8.87 |
264 10.38 |
4.3 .17 |
11.9 .47 |
M12 7/16-20 UNF |
59 2.31 |
71 2.81 |
84 3.31 |
97 3.81 |
65 2.56 |
90 3.56 |
116 4.56 |
141 5.56 |
| HD | M10x1.5 3/8-24 UNF |
152 6 |
M22 7/8-14 UNF |
183 7.19 |
221 8.69 |
259 10.19 |
297 11.69 |
170 6.69 |
208 8.19 |
246 9.69 |
284 11.19 |
5.1 .20 |
12.7 .50 |
|||||||||
| CONDUIT CAPS |
| FOR REPLACEMENT CABLES |
Steering Cable | Boat Control Cable |
Accelerator Cable Manufacturer | Teleflex Cable |
Gear Change Cable | Clutch Cable | Handbrake Cable
Push-Pull Cable | Bowden Cable | Morse Cable
Rossfield Road, Rossfield Industrial Estate,
Ellesmere Port, South Wirral, CH65 3AW
Tel: 0151 355 0004
- Fax: 0151 356 8408
- E-mail: sales@rdb93.co.uk